0-10v Dimming Timer Harvest Sensor Switch HNP102 12VDC Input PWM Doppler

Input voltage: 12 - 24V DC.
Input current: ≥8mA.
*Output signal: 0~10V / PWM.

8 pin DIP switch setting, multiple options to meet
different customer demands.

Source current / Sink current: Max. 20mA;
0-10V leads can not be short-circuit.

Super compact, flexible to be integrated into any
suitable fixtures.

Built-in timer, for end user to specify desired period to
keep the light 100% on before dim down.

Operation temperature: -20 °c ~ + 70 °c.

RoHS compliant.

Daylight Threshold:

This is the threshold for the daylight sensor to switch on & off.
“Lux on”value means the daylight sensor will switch on when detected natural light is less than it.
“Lux off”value means the daylight sensor will switch off when detected natural light is more than it.
Note: Lux-on sampling time--10s; Lux-off sampling time--30s.
*when set as“ Disable”, the daylight sensor will always be 100% on in both day and night.

Timer period

This is the period for the lamp to keep 100% on when natural light is below set threshold.

*when set as“+ ”, this daylight sensor will become a simple on & off daylight sensor, switched on 100% at insufficient natural light, switches off at enough natural light.

Dimming level

After the timer period, if the natural light is still insufficient, the lamp will drop to a pre-defined dimming level. This dimmed level will sustain until the natural light becomes enough and the daylight sensor switch
off totally.

* when set as 0%, means the daylight sensor will directly switch off right after the timer period elapses regardless of the natural light, even in the mid-night.